Bath driveway quotes, passed to

Driveway services in Bath

Bath quotes cover block paving, resin bound, tarmac, gravel and imprinted concrete. Sub-base and drainage belong on the quote, not in a verbal aside.

Block Paving Driveways

Block paving can be repaired in small sections and the tones can sit with Bath stone.

From £70/m² →

Resin Bound Driveways

Permeable resin bound is the finish that usually avoids the front-garden planning rule.

From £70/m² →

Tarmac Driveways

Tarmac is the quicker hard surface, and a stone edge keeps it from looking temporary.

From £45/m² →

Gravel Driveways

Gravel drains through and is often the more sympathetic surface beside Bath stone.

From £30/m² →

Pattern Imprinted Concrete

Imprinted concrete copies setts without the open joints that collect weeds.

From £85/m² →

Patios & Garden Paving

On Bath's slopes, porcelain or natural stone still has to follow the fall away from the house.

From £70/m² →

What does a new driveway cost in Bath?

For Bath, a 45 to 55m² drive is shown at £2,500 to £6,500 including excavation and sub-base. Gravel starts from £30/m², tarmac from £45/m², block paving and resin bound from £70/m², and pattern imprinted concrete from £85/m².

Bath prices run a touch above the national average, reflecting the city's labour market and the access challenges of its older streets. Slopes, Bath stone surroundings and a crossing application each change the figure after a visit.

The full breakdown, including dropped kerbs and drainage, is in our Bath driveway cost guide.

Driveways in a World Heritage city

Bath is not a typical city to pave in. Much of the centre sits in conservation areas, and the city's honey-coloured limestone sets a visual standard that a badly chosen surface can clash with badly. On period properties around Bathwick, Widcombe and Larkhall, the right choice is usually a surface with a traditional look: gravel, sett-style block paving, or a muted resin blend that sits comfortably next to Bath stone.

Front-garden paving rules apply here as everywhere: more than 5m² of non-permeable surface needs planning permission unless water drains to a lawn or border, and in conservation areas Bath & North East Somerset Council can take a closer interest in changes visible from the street. Our planning permission guide explains the rules and the council's process in plain English.

Slopes, steps and tight access

Bath's hills are the other local factor. Drives on sloping plots in Combe Down, Lansdown and Weston need careful falls and often a channel drain at the garage line to keep surface water out of the house. A good quote specifies all of this: excavation depth, sub-base thickness, drainage and edging, not just a square-metre rate.

Four checks on a Bath driveway quote

Ask a Bath tradesperson to put these four things in writing:

• Insurance: see the public liability document before you instruct.
• A nearby job: ask where a recent Bath drive can be seen.
• The paperwork: itemise the sub-base and the drainage.
• Written guarantee: ask what period they offer. Five to ten years is common, and it must be theirs to give.

Surfaces beside Bath stone

As a broad rule across the city: Georgian and Victorian terraces in Bathwick, Widcombe and Oldfield Park suit gravel or sett-look block paving in soft, stone-friendly tones; 1930s semis in Weston, Newbridge and Twerton take charcoal or brindle block paving well; newer estates at Peasedown St John and Keynsham often lean towards resin bound for a crisp modern finish; and period cottages in the villages towards Bathampton and Saltford suit gravel or traditional tarmac with a stone sett edge. Read the Bath comparison and the about page.

Areas covered

Coverage runs across the BA1 and BA2 postcodes, from Larkhall and Bathwick in the city out through Combe Down, Weston and Twerton to Keynsham, Saltford and Peasedown St John.

Full details on the areas covered page.

Driveway guides for Bath homeowners